A user guide for all Men´s and Women´s Step On®
1. Overview
The Nitro Step On binding is a quick boot to binding interface system that has a convenient three point connection. Step On boots feature toe and heel cleats that align with Step On bindings for a easy to use and secure connection. Just Step On and Drop in!
2. Overview of Step On® parts
Overview of Step On® parts
Heel Cleat
The Heel Cleat, positioned on the back of the boot, securely engages with the binding’s heel clip to lock the boot into place. There are two levels – two clicks. When you step in you will here one click then push down more for a 2nd click.
Heel Clip
The Heel Clip automatically locks the boot into the binding by securing the Heel Cleat in place. Similar to a ratchet buckle on a traditional binding.
Cuff Clip
Integrated into the boot backstay, the Cuff Clip neatly manages pant cuffs to ensure a smooth, secure connection with the Heel Cleat.
Release Lever
The release lever sits on the outside of the heel cup. Pull it up to step out—once released, it resets on its own so you can step back in right away.
Forward Lean Adjuster (FLAD)
These two screws located inside the highback are the Forward Lean Adjuster, or FLAD, which let you micro adjust your forward lean angles with a screw driver.
Toe Cleats
The Toe Cleats are located on both side of the toe of the boot and are the cleats that keep your toe aligned and connected with the front Toe Hooks of the Step On® binding.
Toe Hooks
Integrated into the binding baseplate, the spring-loaded Toe Hooks capture the boot’s Toe Cleats with a single downward step, ensuring fast and reliable entry. These parts are also replaceable.
3. The Set-Up
It is important that you make sure you check you have the right size to Step On® binding for your boot size. Before using the Step On System confirm that the sizing is correct.
Size Matters. Before using the Step On system, confirm your boot and binding size match.
Step 1: Know Before You Step On
Read this entire guide before using the Step On system. Understanding the instructions and potential risks will help ensure proper use of your boots and bindings.
Step 2: Match Boots and Bindings
Only Step On boots work with Step On bindings. Do not attempt to use them with any other system. Always confirm that your boots and bindings are designed to work together.
Step 3: Check Size and Fit
The Step On® system is both size- and gender-specific. Refer to the size chart to confirm your binding size matches your boot size. Women’s boots must be paired with women’s bindings, and men’s boots with men’s bindings. Using incompatible sizes or genders can cause malfunction and compromise safety.
Step 4: Use A Leash
Always attach the included leash before riding. Thread the large loop through the instep side of your front binding, pass the clip through the loop, and connect it securely to your boot.
Adjusting the size of your Step On footbed/gas pedal to fit your boot properly.
Nitro Step On® bindings feature an ETP-U adjustable gas pedal – which is designed to fine-tune your fit, reduce toe and heel drag, and deliver more power through your turns. Proper adjustment ensures a smooth engagement of the toe cleats for an easy secure connection. Before stepping on to the system and riding - make sure you adjust and set the Gas Pedals to match your boot size.
Step 1:
Release the rear tabs located in the back corners, by gently prying them open at with a screwdriver or your index finger.
Step 2:
Lift up the the Gas Pedal and Slide the Gas Pedal forward (toward the toe side) until it aligns with your boot sole length. Use the indexed settings next to the rear tabs, marked with US boot sizes, to quickly find the correct position.
Step 3:
Lock the adjustment in place by snapping both rear tabs back into the baseplate notches.
Step On Sizing
| Men's Binding Size | S | M | L | XL |
|---|---|---|---|---|
| Men's Boot Size (US) | 6–8 | 8.5–10.5 | 11–13 | 14–15 |
| Women's Binding Size | S | M | L | |
| Women's Boot Size (US) | 5–6 | 6.5–8.5 | 9–11 | |
| Kids' Binding Size | M (GROM) | L (SMALLS) | ||
| Kids' Boot Size (US) | 11C–2K | 3K–7K | ||
4. Getting In (Stepping On) & Getting Out
Step 1: Clear
Ensure your boots and bindings are free of snow, ice, or debris. Tighten your boots securely and tuck pant cuffs into the Cuff Clips so they don’t interfere with the Heel Cleat.
Step 2: Heel
Starting with your front foot, position your boot over the binding and slide your heel down along the hi-back until the Heel Cleat locks into the Heel Clip. You will hear one click which means you are locked in, but you can push down more to get to the second click which means a more responsive lock and feel.
Step 3: Toes
Shift your weight forward and press your toe downward until both Toe Cleats snap into the Toe Hooks. If one doesn’t engage immediately, gently roll your boot side to side until both lock in securely.
Step 4: Back Foot
Repeat the process with your back foot, and you’re ready to ride.
IMPORTANT:
Always double-check that all Heel and Toe Cleats are fully engaged before riding. Failure to do so may result in serious injury.
Exiting your Nitro Step On® binding is quick and simple.
Pull the Release Lever, lift your heel, shift your weight toward your toes, and rotate your foot slightly to step free.
Warning
Attention When Riding Chairlifts
When loading a chairlift, always fold your back foot hi-back down. This prevents it from catching on the chair or terrain and protects the binding from potential damage.
